5-Flute, Coolant-Through, 45° Chamfer Mill, Un-Coated
C5-C
Coolant‑Through 45° Chamfer Mill for Burr‑Free Chamfering of Aluminum & Non‑Ferrous Alloys
| Cut Diameter | Tip Diameter | Shank Diameter | Overall Length | Neck Back | Part No. |
|---|---|---|---|---|---|
| mm | Coolant Through – Un-Coated | ||||
| 3.00 | 0.75 | 6 | 55 | 19 | C54503007-C |
| 4.00 | 1.00 | 4 | 55 | – | C54504010-C |
| 5.00 | 1.25 | 5 | 55 | – | C54505012-C |
| 6.00 | 1.50 | 6 | 55 | – | C54506015-C |
| 8.00 | 1.75 | 8 | 65 | – | C54508017-C |
| 10.00 | 2.00 | 10 | 75 | – | C54510020-C |
| P | ○ |
|---|---|
| M | ○ |
| K | ○ |
| N | ● |
| S | ○ |
| H | ○ |
Key Features
- 5-flute geometry: designed for superior chip evacuation and high-feed machining.
- Coolant-through shank: large coolant holes deliver 4.25 L (1.12 gal) per minute to the cutting edge, reducing heat and extending tool life.
- Helical cutting edge: reduces vibration.
- Burr-free cutting edge: engineered to leave a clean, burr-free edge.
- High-polish, uncoated: minimizes material bonding in aluminum and non-ferrous alloys.
Applications & Benefits
Applications
45° chamfering, deburring and chamfer roughing.
Ideal Materials
Aluminum alloys, copper alloys and other non-ferrous materials.
Performance Benefits
- Clean, burr-free edges
- Reduced vibration
- Excellent chip evacuation
Speeds & Feeds
Recommended starting parameters. Feed per tooth is shown in mm, with inches in parentheses.
For other diameters: Feed / Tooth (mm) = Cut Diameter (mm) × Multiplication Factor
C5-C // CHAMFERING
| Material Guide | Hardness | M/Min | SFM | Feed / Tooth mm (in) by cut diameter | Multiplication Factor | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.0(0.1181) | 4.0(0.1575) | 5.0(0.1969) | 6.0(0.2362) | 8.0(0.3150) | 10.0(0.3937) | |||||||
| N | ALUMINUM ALLOYS | 6061, 7075, A380 | < 15 HRC | 610 | 2000 | 0.04193(0.00165) | 0.05590(0.00220) | 0.06988(0.00275) | 0.08385(0.00330) | 0.11180(0.00440) | 0.13975(0.00550) | 0.013975 |
| COPPER ALLOYS | C10100, C28000 | |||||||||||
C5-C // ROUGHING
| Material Guide | Hardness | WOC | M/Min | SFM | DOC | Feed / Tooth mm (in) by cut diameter | Multiplication Factor | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.0(0.1181) | 4.0(0.1575) | 5.0(0.1969) | 6.0(0.2362) | 8.0(0.3150) | 10.0(0.3937) | |||||||||
| N | ALUMINUM ALLOYS | 6061, 7075, A380 | < 15 HRC | .10xD | 244 | 800 | .30xD | 0.07620(0.00300) | 0.10160(0.00400) | 0.12700(0.00500) | 0.15240(0.00600) | 0.20320(0.00800) | 0.25400(0.01000) | 0.025400 |
| COPPER ALLOYS | C10100, C28000 | |||||||||||||